202H Knife Sharpening Kit With Accurate Angle Adjustment

The SHARPAL 202H can sharpen blades up to 0.28 in / 7 mm thick, up to 22 in / 560 mm long, and 0.30 in / 7.5 mm or wider.

Yes. The 202H can sharpen small pocket knives as long as the blade can be held securely. For short blades, one clamp is enough if the blade is firmly secured. For extra stability, two clamps can be placed on the same side. Off-center clamping will not affect the sharpening angle.

For narrow blades, secure the blade first. If the blade is too narrow to follow the standard reference distance, ignore the reference distance and clamp the blade as securely as possible. For short blades, one clamp may be enough if the blade is held firmly. For additional stability, use two clamps on the same side.

The SHARPAL 202H offers an adjustable sharpening angle from 10° to 35°. For wide blades, the usable angle range may be slightly more limited depending on the blade width and clamping position.

Use the A scale for standard knives when the distance from the clamp end to the cutting edge is 1/2 in / 12.7 mm.

Use the B scale for wide knives when the distance from the clamp end to the cutting edge is 2 in / 50.8 mm.

The 202H angle gauge is designed with a built-in 10° starting angle. Add 10° to the gauge reading to get the actual sharpening angle.

For example, if the gauge reads 10°, the actual sharpening angle is 20°.

Start with the grit that matches the condition of your edge.
Use 220 grit only for severely dull, damaged, or chipped edges.
Use 325 grit for edge restoration or heavier sharpening.
For regular sharpening and maintenance, start with 600 grit or 1000 grit.
For final refinement, polishing, and burr removal, use the 3000 grit equivalent ceramic plate, 6000 grit whetstone, and leather strop as needed.

No. You do not need to use every grit every time.
For a slightly dull knife, you may only need 600 or 1000 grit followed by stropping. Use the full grit progression only when the edge needs repair, major sharpening, or a more refined finish.

Soaking is not needed.
If using the 3000 grit equivalent ceramic plate, it can be used dry or with a small amount of water for a smoother sharpening feel.
When using the 6000 grit whetstone, keep the surface wet during sharpening. Add water as needed to maintain a smooth, well-lubricated surface.

This is normal. New diamond abrasives have a break-in period and may feel very aggressive during the first several uses.
As the surface breaks in, it becomes smoother and more consistent. This does not mean the diamond abrasive is wearing out too fast.